- Two relay outputs that can be used for humidifying or dehumidifying equipment
- Voltage range of 100-230Vac at 50/60Hz, with a maximum current of 10A
- Maximum power of 1200W at 120Vac and 2200W at 220Vac
- Measure humidity from 10-99% RH
- Accuracy of humidity measurement is between +/- 3% to +/- 5% RH
Plug-n-Play: No complicated installation required. Display the set humidity value and the measured humidity value at the same time with 2 screens. Support humidity calibration and dehumidification control delay protection
Remote Control: Connect the IHC-200 Wi-Fi humidity controller to 2.4GHz Wi-Fi, then you can monitor or adjust the humidity on your phone through the INKBIRD app at any time anywhere
Please contact us at anytime you want to, we will reply in 24 hours
High/ Low Humidity Alarm: Set a High/ Low Humidity Alarm, the controller will alarm to remind you if the humidity value exceeds the setting value, and it also alarm when a probe error occurs. Press any button to turn off the alarm sound or you can turn it off on your phone